Figure 6 shows details for constructing the
heat deflector, barrel stop and the axial-fan bracket for the Stewiacke Warm-Box
Milk Bar. The barrel stop is 2"x2"x1/8" steel angle screwed to
the floor. The heat deflector is 8"x15" sheet metal attached to two
pieces of 1.5-inch flat stock. The float stock for the heat deflector is attached
to the steel angle for the barrel stop. The axial fan bracket is made with 1/8"
steel flat stock. It has been bent to form an L-shape with 2- and 5-inch legs.
The metal for the bracket has a cutout in the longer dimension to accommodate
the axial fan.
Stewiacke
Warm-Box Milk Bars - Free-Access Milk Feeding in Cold Calf Barns